Quantcast
Channel: Thecus esupport system
Viewing all 227 articles
Browse latest View live

Overview about how Thecus staff check NAS remotely

$
0
0

Overview about how Thecus staff check NAS remotely

For some issue Thecus need arrange engineer to check your NAS remotely, and difference issue need very method to access your NAS or environment, thus following difference ways for your reference: 

1. Publish NAS for remote access, such issue for NAS internal & RAID assemble issue mainly, and our HQ engineer (from Taiwan at GMT+8) check and try to repair for your NAS directly, we need access to NAS HTTP(port 80) & SSH(port 22), and also please change a temp admin password for we able to login.

And following guide for your reference:

Three ways to publish the NAS on the internet for Thecus to access and analysis http://esupport.thecus.com/default_import/Knowledgebase/Article/View/57/0/three-ways-to-publish-the-nas-on-the-internet-for-thecus-to-access-and-analysis
A Quick Guide to Publish Thecus NAS on Internet http://esupport.thecus.com/Knowledgebase/Article/View/577/0/thecus_internet_quick_guide_20100701_v10pdf

 

2. TeamViewer connection, it is for user whom have WEB interface or related operation issue mainly, but it is very sensitive for bandwidth, because most connection would cross pacific or Eurasia, even user would guarantee the bandwidth, but it is for user ‘local country or city bandwidth only, and on one able to guaranty the bandwidth all the way to each other. Thus would be dangerous while text command keying and screen delay especially for RAID assemble, it is what concern about and won’t recommend to doing this way for NAS or RAID issue. And also following 3 check point need to know:

2-1. Please use Teamviewer version 9 or take Thecus'version http://www.thecus.com/TTVQS.exe

2-2. Due to time zone difference (HQ engineer from Taiwan at GMT+8), please keep PC always on prevent PC/NB going to sleep mode.

2-3. If you would like check with or HQ enginner together, here recomend choose 03:00~12:00 at GMT+0 (London) time zone as possible to pervent form staff fatigue and mistake happen. (http://www.worldtimebuddy.com/

 

3. VPN connection, if your site or Route have VPN server available, as like most ASUS route have this function, it is welcome to provide your connection info us to login.

 

4. Remote access security, please reply your access IP or code to ESUPPORT directy, please don’t mail to any personal account. Of course for Teamview & VPN connection we also need to know the NAS IP address and please change a temp ADMIN password to we able to login NAS.

 

 


OS5 X64 BTRFS snapshot guide

$
0
0

OS5 X64 BTRFS snapshot guide:

Snapshot_OS5_x64_v2.pdf

Nsync guide for OS5 X32

$
0
0

Nsync guide for OS5 X32 N4100 / N4200 / N5200 / N5500 / N7700 series / N8800 series , please refer to attchment files.


Thecus N4100 Nsync Quick Guide 2008-08-18.pdf
Thecus_nsync_over_internet_quick_guide_20090527.pdf

N4310 OS6 build latest USB upgrade

$
0
0

N4310 OS6 build 867 (since 2015/Jun/25)

A. Download ZIP file from:
http://www.thecus.com/Downloads/DOM/N4310-USB.2.1.2-FLASH-867.zip
B. Please unzip to an empty USB driver root folder.
C. Power N2310/N4310 off and eject all HDD out of NAS.
D. Plug USB driver on NAS.
E. Power NAS up and wait about 7~14 mins.
F. Since update completed and system would reboot by itself.
G. Search N2310 from N2310/N4310 Thecus Intelligent NAS (http://install.thecus.com) pick N2310/N4310 and next to SHUTDOWN.
*N2310 OS6 have 2 copy OS from NAS internal flash & RAID/JBOD HDD, this update for NAS internal flash only.
**If can't update or unsuccessful, please provide the LOG file from USB driver for your tech staff to check for you.

Examples: USB root.
│  mtd-utils-1.4.3-1.1.t2.ppc.rpm
│  N4310_OS6.0.867.t2.bin
│  N4310_OS6.0.867.t2.bin.md5
│  nas_img-tools-1.1.5-1.t1.i686.rpm
│  nas_img-tools-1.1.5-1.t2.ppc.rpm
│  README
│  USB_UPGRADE_GUIDE_N4310_OS6.0.867.t2.txt

└─gofactory
    │  badblock_check.sh
    │  factory_test.sh
    │  N2310-series.sh
    │  N2520-series.sh
    │  rpms-md5_validation.sh
    │  setting.conf
    │  upgrade.conf
    │  utility_start.sh
    │
    ├─i686
    │      dd
    │      du
    │      md5sum
    │      sha256sum
    │
    ├─list_repository
    │      Elecom_V1.00_rpms-md5.list
    │      N2310_OS6.build_769.t2_rpms-md5.list
    │
    └─ppc
            dd
            du

*******************************

N2520 N2560 N4520 N4560 OS6.1 最新 U盘更新工具 (更新日期 2015/Oct/05)

$
0
0

N2520 N2560 N4520 N4560 OS6.1 最新U盘更新工具

Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1 (更新日期 2015/Oct/05)
N2520=N2560=N4520=N4560

  1. 下载 1.1GB ZIP 檔:
    http://www.thecus.com/Downloads/DOM/Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.zip
    B. 准备一个至少8G的U盘,并将其格式化为FAT/FAT32格式. 把下载的ZIP 档案解压缩到U盘根目录里.
    C. 将NAS关机。(将硬盘移出 NAS)
    D. 将U盘插入NAS 的 USB2.0 接口(黑色).
    E. 将NAS开机,等待 7~14 钟
    F. 当更新动作完成之后,NAS会自动关机。
    *OS6 有2份 OS ,一份在NAS 内部flash , 一份在RAID里, 此更新只会更新NAS 内部flash.
    **如果无法成功更新, 请提供U盘中的记录文件给Thecus 工程师分析.
    G. 从http://install.thecus.com 下载最新版本的Thecus Intelligent NAS, 重新安装Thecus Intelligent NAS, 并执行Thecus Intelligent NAS找到 NAS IP, 并跟之前一样从浏览器登入NAS管理接口.

USB 随身碟示意图
│ mtd-utils-1.4.3-1.fc16.ppc.rpm
│ N2520-spi_nor.1.0.5.bin
│ N2520-spi_nor.1.0.5.bin.md5
│ N2520_OS6.1.21.t1.2G.bin
│ N2520_OS6.1.21.t1.2G.bin.md5
│ N2520_OS6.1.21.t1.4G.bin
│ N2520_OS6.1.21.t1.4G.bin.md5
│ N2560-spi_nor.1.0.1.bin
│ N2560-spi_nor.1.0.1.bin.md5
│ N4520-spi_nor.1.0.5.bin
│ N4520-spi_nor.1.0.5.bin.md5
│ N4560-spi_nor.1.0.1.bin
│ N4560-spi_nor.1.0.1.bin.md5
│ nas_img-tools-1.1.3-1.fc16.i686.rpm
│ nas_img-tools-1.1.3-1.fc16.ppc.rpm
│ README
│ Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.txt

├─gofactory
│ │ badblock_check.sh
│ │ factory_test.sh
│ │ N2310-series.sh
│ │ N2520-series.sh
│ │ nanddump.log
│ │ setting.conf
│ │ upgrade.conf
│ │ utility_start.sh
│ │
│ ├─i686
│ │ dd
│ │ du
│ │ md5sum
│ │ sha256sum
│ │
│ └─ppc
│ dd
│ du

├─N2520-spi_nor.1.0.5
│ boots
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ gen5_sc_30-4.bin
│ gen5_sc_30-4.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N2560-spi_nor.1.0.1
│ boots
│ gen5_dc_30-5.bin
│ gen5_dc_30-5.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N4520-spi_nor.1.0.5
│ boots
│ gen5_dc_30-3.bin
│ gen5_dc_30-3.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

└─N4560-spi_nor.1.0.1
boots
gen5_dc_30-5.bin
gen5_dc_30-5.bin.md5
gen5_pm8051_30-2.bin
gen5_pm8051_30-2.bin.md5
thecuslogo_480.bmp
thecuslogo_480.bmp.md5

 

N2520 N2560 N4520 N4560 OS6.1 最新 USB 更新工具 (更新日期 2015/Oct/05)

$
0
0

N2520 N2560 N4520 N4560 OS6.1 最新 USB 更新工具

Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1 (更新日期 2015/Oct/05)
N2520=N2560=N4520=N4560

A. 下載 1.1GB ZIP 檔:
http://www.thecus.com/Downloads/DOM/Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.zip
B. 準備一個至少8G的USB隨身碟,並將其格式化為FAT/FAT32格式. 把下載的ZIP 檔案解壓縮到USB隨身碟根目錄裡.
C. 將NAS關機。(將硬碟移出 NAS)
D. 將USB隨身碟插入NAS 的 USB2.0 接口(黑色).
E. 將NAS開機,等待 7~14 鐘
F. 當更新動作完成之後,NAS會自動關機。
*OS6 有2份 OS ,一份在NAS 內部flash , 一份在陣列裡, 此更新只會更新NAS 內部flash.
**如果無法成功更新, 請提供USB隨身碟中的記錄檔給Thecus 工程師分析.
G. 從  http://install.thecus.com 下載最新版本的Thecus Intelligent NAS, 重新安裝Thecus Intelligent NAS, 並執行Thecus Intelligent NAS找到 NAS IP, 並跟之前一樣從瀏覽器登入NAS管理介面.

USB 隨身碟示意圖
│ mtd-utils-1.4.3-1.fc16.ppc.rpm
│ N2520-spi_nor.1.0.5.bin
│ N2520-spi_nor.1.0.5.bin.md5
│ N2520_OS6.1.21.t1.2G.bin
│ N2520_OS6.1.21.t1.2G.bin.md5
│ N2520_OS6.1.21.t1.4G.bin
│ N2520_OS6.1.21.t1.4G.bin.md5
│ N2560-spi_nor.1.0.1.bin
│ N2560-spi_nor.1.0.1.bin.md5
│ N4520-spi_nor.1.0.5.bin
│ N4520-spi_nor.1.0.5.bin.md5
│ N4560-spi_nor.1.0.1.bin
│ N4560-spi_nor.1.0.1.bin.md5
│ nas_img-tools-1.1.3-1.fc16.i686.rpm
│ nas_img-tools-1.1.3-1.fc16.ppc.rpm
│ README
│ Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.txt

├─gofactory
│ │ badblock_check.sh
│ │ factory_test.sh
│ │ N2310-series.sh
│ │ N2520-series.sh
│ │ nanddump.log
│ │ setting.conf
│ │ upgrade.conf
│ │ utility_start.sh
│ │
│ ├─i686
│ │ dd
│ │ du
│ │ md5sum
│ │ sha256sum
│ │
│ └─ppc
│ dd
│ du

├─N2520-spi_nor.1.0.5
│ boots
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ gen5_sc_30-4.bin
│ gen5_sc_30-4.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N2560-spi_nor.1.0.1
│ boots
│ gen5_dc_30-5.bin
│ gen5_dc_30-5.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N4520-spi_nor.1.0.5
│ boots
│ gen5_dc_30-3.bin
│ gen5_dc_30-3.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

└─N4560-spi_nor.1.0.1
boots
gen5_dc_30-5.bin
gen5_dc_30-5.bin.md5
gen5_pm8051_30-2.bin
gen5_pm8051_30-2.bin.md5
thecuslogo_480.bmp
thecuslogo_480.bmp.md5

N2520 N2560 N4520 N4560 OS6.1 build latest USB upgrade

$
0
0

N2520 N2560 N4520 N4560 OS6.1 build latest USB upgrade

Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1 (since 2015/Oct/05)
N2520=N2560=N4520=N4560

A. Download 1.1GB ZIP file from:
http://www.thecus.com/Downloads/DOM/Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.zip
B. Please unzip to an empty 8GB or above USB driver root folder.
C. Power NAS off and eject all HDD out of NAS.
D. Plug USB driver on NAS USB2.0 port (black).
E. Power NAS up and wait about 7~14 mins.
F. Since update completed and system would power off automatically.
*OS6 have 2 copy OS from NAS internal flash & RAID/JBOD HDD, this update for NAS internal flash only.
**If can't update or unsuccessful, please provide the LOG file from USB driver for your tech staff to check for you.
G. Download latest Thecus Intelligent NAS from http://install.thecus.com to discover NAS IP and access NAS from broswer as usual.

Examples: USB root.
│ mtd-utils-1.4.3-1.fc16.ppc.rpm
│ N2520-spi_nor.1.0.5.bin
│ N2520-spi_nor.1.0.5.bin.md5
│ N2520_OS6.1.21.t1.2G.bin
│ N2520_OS6.1.21.t1.2G.bin.md5
│ N2520_OS6.1.21.t1.4G.bin
│ N2520_OS6.1.21.t1.4G.bin.md5
│ N2560-spi_nor.1.0.1.bin
│ N2560-spi_nor.1.0.1.bin.md5
│ N4520-spi_nor.1.0.5.bin
│ N4520-spi_nor.1.0.5.bin.md5
│ N4560-spi_nor.1.0.1.bin
│ N4560-spi_nor.1.0.1.bin.md5
│ nas_img-tools-1.1.3-1.fc16.i686.rpm
│ nas_img-tools-1.1.3-1.fc16.ppc.rpm
│ README
│ Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.21.t1.txt

├─gofactory
│ │ badblock_check.sh
│ │ factory_test.sh
│ │ N2310-series.sh
│ │ N2520-series.sh
│ │ nanddump.log
│ │ setting.conf
│ │ upgrade.conf
│ │ utility_start.sh
│ │
│ ├─i686
│ │ dd
│ │ du
│ │ md5sum
│ │ sha256sum
│ │
│ └─ppc
│ dd
│ du

├─N2520-spi_nor.1.0.5
│ boots
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ gen5_sc_30-4.bin
│ gen5_sc_30-4.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N2560-spi_nor.1.0.1
│ boots
│ gen5_dc_30-5.bin
│ gen5_dc_30-5.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

├─N4520-spi_nor.1.0.5
│ boots
│ gen5_dc_30-3.bin
│ gen5_dc_30-3.bin.md5
│ gen5_pm8051_30-2.bin
│ gen5_pm8051_30-2.bin.md5
│ thecuslogo_480.bmp
│ thecuslogo_480.bmp.md5

└─N4560-spi_nor.1.0.1
boots
gen5_dc_30-5.bin
gen5_dc_30-5.bin.md5
gen5_pm8051_30-2.bin
gen5_pm8051_30-2.bin.md5
thecuslogo_480.bmp
thecuslogo_480.bmp.md5

N2310 OS6 最新版本 USB 更新(繁中)

$
0
0

N2310 OS6 build 867 (since 2015/Jun/25)

A. 下載 ZIP 檔:
http://www.thecus.com/Downloads/DOM/N2310-USB.2.1.2-FLASH-867.zip
B. 解壓縮ZIP 檔至空白USB隨身碟的根目錄。
C. 請將NAS關機。並取出所有的硬碟。
D. 將USB隨身碟插入NAS。
E. 將NAS開機,並等待大約7~14分鐘。
F. 系統會在執行完後自動關機。
G. 透過最新版本的N2310 Thecus Intelligent NAS (http://install.thecus.com) 搜尋N2310,選擇 N2310,然後選擇關閉。

*如果N2310使用有資料的硬碟開機(如過您還需要這些資料),但Thecus Intelligent NAS要求建立新RAID時,請勿繼續此動作,並參考以下FAQ: http://thecus.kayako.com/default_import/Knowledgebase/Article/View/629/0/if-n2310-hw-replaced-but-cant-access-to-raid-data
**N2310 OS6 有2份 OS,一份在NAS 內建flash ,一份在 RAID/JBOD HDD,此動作只更新NAS 內建flash。
***如果執行超過30鐘沒有自動關機,則表示無法更新成功,請提供USB隨身碟內的LOG檔案,寄至support@thecus.com給工程師分析。

 USB 隨身碟示意圖
│  mtd-utils-1.4.3-1.1.t2.ppc.rpm
│  N2310_OS6.0.867.t2.bin
│  N2310_OS6.0.867.t2.bin.md5
│  nas_img-tools-1.1.5-1.t1.i686.rpm
│  nas_img-tools-1.1.5-1.t2.ppc.rpm
│  README
│  USB_UPGRADE_GUIDE_N2310_OS6.0.867.t2.txt

└─gofactory
    │  badblock_check.sh
    │  factory_test.sh
    │  N2310-series.sh
    │  N2520-series.sh
    │  rpms-md5_validation.sh
    │  setting.conf
    │  upgrade.conf
    │  utility_start.sh
    │
    ├─i686
    │      dd
    │      du
    │      md5sum
    │      sha256sum
    │
    ├─list_repository
    │      Elecom_V1.00_rpms-md5.list
    │      N2310_OS6.build_769.t2_rpms-md5.list
    │
    └─ppc
            dd
            du

******************************* 


N2310 OS6 最新版本 USB 更新(简中)

$
0
0

N2310 OS6 build 867 (since 2015/Jun/25)

A. 下载 ZIP 档:
http://www.thecus.com/Downloads/DOM/N2310-USB.2.1.2-FLASH-867.zip
B. 解压缩ZIP 档至空白USB随身碟的根目录。
C. 请将NAS关机。并取出所有的硬碟。
D. 将USB随身碟插入NAS。
E. 将NAS开机,并等待大约7~14分钟。
F. 系统会在执行完後自动关机。
G. 透过最新版本的N2310 Thecus Intelligent NAS (http://install.thecus.com) 搜寻N2310,选择 N2310,然後选择关闭。

*如果N2310使用有资料的硬碟开机(如过您还需要这些资料),但Thecus Intelligent NAS要求建立新RAID时,请勿继续此动作,并参考以下FAQ: http://thecus.kayako.com/default_import/Knowledgebase/Article/View/629/0/if-n2310-hw-replaced-but-cant-access-to-raid-data
**N2310 OS6 有2份 OS,一份在NAS 内建flash ,一份在 RAID/JBOD HDD,此动作只更新NAS 内建flash。
***如果执行超过30钟没有自动关机,则表示无法更新成功,请提供USB随身碟内的LOG档案,寄至support@thecus.com给工程师分析

 USB 随身碟示意图
│  mtd-utils-1.4.3-1.1.t2.ppc.rpm
│  N2310_OS6.0.867.t2.bin
│  N2310_OS6.0.867.t2.bin.md5
│  nas_img-tools-1.1.5-1.t1.i686.rpm
│  nas_img-tools-1.1.5-1.t2.ppc.rpm
│  README
│  USB_UPGRADE_GUIDE_N2310_OS6.0.867.t2.txt

└─gofactory
    │  badblock_check.sh
    │  factory_test.sh
    │  N2310-series.sh
    │  N2520-series.sh
    │  rpms-md5_validation.sh
    │  setting.conf
    │  upgrade.conf
    │  utility_start.sh
    │
    ├─i686
    │      dd
    │      du
    │      md5sum
    │      sha256sum
    │
    ├─list_repository
    │      Elecom_V1.00_rpms-md5.list
    │      N2310_OS6.build_769.t2_rpms-md5.list
    │
    └─ppc
            dd
            du

*******************************

MOTION EYE USB & IPCAM compatibility list. Motion - Working Devic...

iSCSI Quick Configuration Guide 64-bit FW edition for V2.04.05b o...

$
0
0

iSCSI Quick Configuration Guide 64-bit FW edition for V2.04.05b or later
This guide is for all Thecus NAS with 64bit firmware.
N8900 / N8900V / N12000 / N12000V / N16000 / N16000V / N6850 / N8850 / N10850 / N2800 / N4800 / N5550 / N7700PROv2 / N8800PROv2/N7710-G/N8810U-G

iSCSI Quick Configuration Guide 32-bit FW edition

$
0
0

iSCSI Quick Configuration Guide 32-bit FW edition

If RAID degraded how should I do?

$
0
0

If RAID degraded how should I do?

 

If we created RAID 5 from HDD1, 2, 3 & 4, but system warning about RAID degraded, please check following steps:

 

  1. Check from NAS ADMIN WEB page -> STORAGE -> RAID MANAGEMENT page, to check which HDD out of RAID. The "DISKS USED" file would show which RAID HDD existed in the RAID, as like number "1, 2, 3" means HDD1 HDD2 & HDD3 existed the RAID.

 

  1. From item 0 know it is a RAID5 volume form HDD1~4, but "RAID MANAGEMENT"-> "DISKS USED" know HDD1~3 exited but HDD4 out of RAID.

 

  1. We need check this HDD health status first, check from NAS ADMIN WEB page -> STORAGE -> DISK INFORMATION.

3-1. If HDD4 missing, perhaps this HDD is damaged, here recommend replace a health HDD join back to RAID. (Thecus provide HDD only; if you need HDD RMA service please consult where you purchase this HDD or HDD manufacturer directly.)

3-2. If HDD4 show on the screen, please click to choose HDD4 and check SMART icon to check HDD health status, normally the "Reallocated Sector Count" "Current Pending Sector" & "End-to-End error" should be 0. (Check the HDD SMART is enough and you have no necessary to do "DETECT BAD BLOCK" or "BAD BLOCK SCAN") We recommend replace HDD if above 3 item not stay at 0, because a health HDD should have no this value, once any number occurred means HDD have something wrong and should going to worst in the further. (Each HDD have difference reability, we STRONG recommend choose enterprise HDD)

3-3. If HDD4 show on the screen, please click to choose HDD4 and check SMART icon to check HDD health status, and "Reallocated Sector Count" "Current Pending Sector" & "End-to-End error" stay at 0, means HDD should be health, perhaps someone shaking, loosen or remove this HDD, after check installation and we could add this HDD back to RAID.

 

  1. If went to add HDD into a DEGRADED RAID, please check from NAS ADMIN WEB page -> STORAGE -> RAID MANAGEMENT page -> Choose the RAID volume -> EDIT -> check the "SPARE" or "HOT SPARE" box which HDD you went join into RAID volume for rebuilding -> APPLY for RAID rebuilding. During RAID rebuilding NAS and HDD would be busy and response slow, even we could access NAS for some basic file IO, but it is NOT recommended doing this. Here recommend choose holiday or non-business hour for RAID rebuilding. Also please configure EMAIL NOTIFICATION before and don't stay at RAID MANAGEMENT page, in reason this page would check RAID status every few second, thus EMAIL notification would mail to you while RAID rebuild completed.

 

 

*Note1: If you can't get EMAIL notification or test mail from GMAIL, please check following FAQ:

http://thecus.kayako.com/default_import/Knowledgebase/Article/View/580/0/why-my-nas-cant-accept-gmail-as-email-notification-account

or

https://support.google.com/accounts/answer/6010255

 

 

If NAS install LSI SAS 9200-8e to linking D16000 but unbootable.

$
0
0

If NAS install LSI SAS 9200-8e to linking D16000 but unbootable.

A. We need prepare an USB driver as a Free DOS bootable disk from:
http://rufus.akeo.ie/ or https://github.com/downloads/pbatard/rufus/rufus_v1.1.7f.exe
B. Copy BIOS file and unzip into USB driver.
http://www.thecus.com/Downloads/beta/bios/N89_T40_D16.zip
C. Plug USB driver into NAS back panel USB2.0 port, and USB keyboard & VGA/HDMI to monitor.
D. Power up NAS & press F2 into BIOS.
E. Configure BIOS boot menu booting from USB driver.
F. Boot into DOS, change to folder "DOS" and type "N89_T40.bat" for BIOS update.

 

N16000, N16000PRO, N16000V, N12000, N12000PRO, N12000V, N8900, N8900PRO, N8900V

If N4310 HW damaged how to access data again. (RAID data rescue)

$
0
0

If N4310 HW damaged how to access data again. (RAID data rescue)

Please kindly assist us doing following steps to update via USB & ADMIN WEB UI "BOTH" for this issue:

A-USB Flash
Please update N4310 internal MB OS to 828 and then update to 867:
N4310 OS6 build 828 & JM patch USB upgrade
http://esupport.thecus.com/default_import/Knowledgebase/Article/View/267/0/n4310-os6-build-828--jm-patch-usb-upgrade
N4310 OS6 build 867 USB upgrade for brand new initial
http://www.thecus.com/Downloads/DOM/N4310-USB.2.1.2-FLASH-867.zip


B- Choose one of item depend on you condition.
B-1. (If went to keep user data) Via following USB tool remove HDD OS but keep data for a brand new initial:
http://esupport.thecus.com/Knowledgebase/Article/View/217/0/how-to-remove-n2310-n2520-n2560-n4520-n4560-os6-from-hdd-and-keep-data-than-doing-a-new-os-initial
B-2. (If went to clean all data out) Via following USB tool clean HDD OS up for a brand new initial:
http://esupport.thecus.com/Knowledgebase/Article/View/216/0/how-to-clean-n2310-n2520-n2560-n4520-n4560-os6-hdd-up-and-doing-a-brand-new-initial

C-INTELLIGENT NAS
Download latest Intelligent NAS from http://install.thecus.com and initial the N4310

D-AMDIN UI
D-1.Download latest or beta for ADMIN WEB UI upgrade file from:
http://www.thecus.com => Linux NAS => N4310 => Downloads => Firmware => http://www.thecus.com/sp_download_page.php?TYPE_ID=3&PROD_ID=97
D-2.Login ADMIN WEB UI PAGE->LEFT UPPER CONER A GEAR BOX ICON -> CONTROL PANEL -> OFFICAL NAS APPLICATION -> manual upload latest N4310 FW -> UPDATE, and than reboot NAS.

E-Once above action can't make NAS back to work, please contact with your reseller, lcoal distributor or Thecus Branch office for RMA service directly.

Distributor
http://www.thecus.com/wtb.php

Thecus Branch office
http://www.thecus.com/about_contact.php

In US & Canada please contact with Thecus US directly for RMA service and following Thecus info for your reference:
rma_us@thecus.com
487 Montague Expressway, Milpitas , CA 95035
Support Tel: (408) 262 6331

 


If N2520 N2560 N4520 N4560 HW damaged how to access data again. (...

$
0
0

If N2520 N2560 N4520 N4560 HW damaged how to access data again. (RAID data rescue)

If HDD & RAID is health
1. Please arrange another same model NAS.
2. Via USB upgrade tool upgrade NAS HW to latest version.
http://www.thecus.com/Downloads/DOM/Thecus_USB_Upgrade.2.0.0-N2520_OS6.1.19.t1.zip (recommend)
or
http://www.thecus.com/Downloads/DOM/Thecus_USB_Upgrade-N2520_OS6.1-12.zip
3. Since USB upgrade successfully, and power NAS off.
4. Plug HDD into NAS and power NAS up.
5. Via latest version Intelligent to search NAS.
http://install.thecus.com
6. If Intelligent NAS found the NAS and no any "click to assist" or related info, we just need access NAS'WEB site and able to access NAS again.

If HDD & RAID not working.
7. If "click to assist" or related info show up, which means this HDD RAID have issue, and please contact your reseller, distributor or Thecsu tech support for data rescue.
8. Arrange an OS5 X64 NAS and power up without HDD.
http://thecus.kayako.com/default_import/Knowledgebase/Article/View/606/0/thecus-raid-roaming-table
9. Login OS5 X64 NAS and hot plug HDD into NAS.
10. Contact Thecus tech support for remote operation.
http://esupport.thecus.com

If N2310 HW replaced but can't access to RAID data.

$
0
0

If N2310 HW replaced but can't access to RAID data.


If latest INTELLIGENT NAS V1.01.20 (http://install.thecus.com) unable help you to login NAS directly.
But asking to "Create RAID", "ASSIST RIAD" or related message, please arrange following steps for our staff to help you:

1. Preare Thecsu TeamViewer Quick Support (Teamviewer9 only) from http://www.thecus.com/TTVQS.exe
2. Power NAS without HDD.
3. Since INTELLIGENT NAS discovered N2310, and hot plug HDD into N2310.
4. Submit ticket from http://esupport.thecus.com for our staff to help you remotely.

If N2310 HW damaged how to access data again. (RAID data rescue)

$
0
0

If N2310 HW damaged how to access data again. (RAID data rescue)

Please kindly assist us doing following steps to update via USB & ADMIN WEB UI "BOTH" for this issue:

A-USB Flash
Please update N2310 internal MB OS to latest version:
http://esupport.thecus.com/Knowledgebase/Article/View/240/0/n2310-os6-build-827-usb-upgrade
If blue power LED blinking over 30 mins means this unit have HW issue please goto item E.

B- Choose one of item depend on you condition.
B-1. (If went to keep user data) Via following USB tool remove HDD OS but keep data for a brand new initial:
http://esupport.thecus.com/Knowledgebase/Article/View/217/0/how-to-remove-n2310-n2520-n2560-n4520-n4560-os6-from-hdd-and-keep-data-than-doing-a-new-os-initial
B-2. (If went to clean all data out) Via following USB tool clean HDD OS up for a brand new initial:
http://esupport.thecus.com/Knowledgebase/Article/View/216/0/how-to-clean-n2310-n2520-n2560-n4520-n4560-os6-hdd-up-and-doing-a-brand-new-initial

C-INTELLIGENT NAS
Download latest Intelligent NAS from http://install.thecus.com and initial the N2310

D-AMDIN UI
D-1.Download latest or beta for ADMIN WEB UI upgrade file from:
http://www.thecus.com => Linux NAS => N2310 => Downloads => Firmware => http://www.thecus.com/sp_download_page.php?TYPE_ID=3&PROD_ID=97
D-2.Login ADMIN WEB UI PAGE->LEFT UPPER CORNER A GEAR BOX ICON -> CONTROL PANEL -> OFFICIAL NAS APPLICATION -> manual upload latest N2310 FW -> UPDATE, and then reboot NAS.

E-Once above action can't make NAS back to work, please contact with your reseller, local distributor or Thecus Branch office for RMA service directly.

Distributor
http://www.thecus.com/wtb.php

Thecus Branch office
http://www.thecus.com/about_contact.php

In US & Canada please contact with Thecus US directly for RMA service and following Thecus info for your reference:
rma_us@thecus.com
487 Montague Expressway, Milpitas , CA 95035
Support Tel: (408) 262 6331

How Windows7 connect to VPN Server L2TP IPSec

$
0
0

Please refer to attachment

How_Windows7_connect_to_VPN_Server_L2TP_IPSec.pdf

 

 

How to upgrade W2000 W4000 & W5000 to 4GB DRAM total

$
0
0

The W2000 W4000 & W5000 support up to 2GBx2=4GB max, if you need upgrade to 4GB memory, and following items for your refrence:
1. Get compatible DRAM from list http://wss.thecus.com/sp_compatibility.php -> W4000 -> Memory Compatibility List -> http://www.thecus.com/download/compatibility/memory/Thecus_Memory_list.pdf
2. If you unable to get the DRAM from listed, but you have other 2GB DDR3 SO-DIMM available, please doing following DRAM compatibility test at least for 48 hours.
http://esupport.thecus.com/Knowledgebase/Article/View/214/0/usb-boot--memtest86
3. Check enclose file abuout W2000 & W4000 DRAM assemble guide. The W5000 just need loose 3 back panel screws to revmoce back panel, and take the top cover out then able to add the DRAM.

 

Viewing all 227 articles
Browse latest View live